F-150 Raptor Forums banner
1 - 2 of 2 Posts

·
Administrator
Joined
·
1,470 Posts
To install SW headers, you have to remove the engine skid plates, skid plate on left side of transmission cross member, the transmission cross member, starter, move the steering shaft out of the way, remove nuts/bolts from right motor mount (you have to lift the motor), move oil dipstick tube/dipstick, etc., etc. You don't have to pull the engine out, but you do have to lift it.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top